Filter
Top Products
80
Operating Onkyo Products Using the Remote
Controller
The RC-511M remote controller is a useful tool that can
not only operate the TX-NR801/TX-NR801E, but also all
the other components of your home theater as well. To
operate any component, first press the Mode button on the
remote controller that corresponds to the component that
you wish to control. Then simply press the desired opera-
tion button and the component will operate accordingly.
To operate a digital satellite tuner, cable, VCR, or televi-
sion with the remote controller, first program the signal to
the button.
There are two methods. One method is selecting the
name of a different brand from the table, entering the
setting number listed, and calling up the pre-program-
ming code (See page 83). The other method is sending
the commands from the other brand’s remote control
directly into this remote controller (See pages 86-87).
Connecting your -compatible Onkyo CD player,
MD recorder, DVD player, or cassette recorder to the
TX-NR801/TX-NR801E via allows you to control
your system with the TX-NR801/TX-NR801E’s remote
controller by pointing it at the TX-NR801/TX-NR801E.
This allows you to control components that are out of
sight, for example, in a cabinet. Since you don’t have to
enter any special codes, or do any programming,
allows you to control these components quickly and
easily. See page 26 for connection information.
Note:
To use the function, you must make an connec-
tion and an analog RCA/phono connection between the
AV component and your TX-NR801/TX-NR801E, even
if they are connected digitally.
Operating Onkyo Products Using the
Connection
1
Press the MODE button.
• When operating the Onkyo cassette tape deck,
press the RCVR MODE button.
• When operating the Onkyo DVD player, press
the DVD MODE button.
• When operating the Onkyo CD player, press
the CD MODE button.
• When operating the Onkyo MD player, press
the SAT/MD MODE button.
2
Point the remote controller at the
TX-NR801/TX-NR801E and press the
desired operation button.
MODE buttons
DVD mode
ON Turns DVD player on and off
STANDBY
Turns DVD player off (Some sets may not respond to this button. In this
case, use the ON button to put the DVD player in the standby state.)
SETUP Displays the OSD of the DVD player
Moves cursor in the OSD Menu of the DVD player
ENTER Enter button for the OSD Menu of the DVD player
RETURN Return button for the OSD Menu of the DVD player
TOP MENU or
MENU
Displays menu screens recorded on DVD media
DISC
Selects disc in DVD changer
AUDIO SEL Selects audio or language track (if recorded on the DVD)
ANGLE Selects a camera angle (if recorded on the DVD)
SUBTITLE Selects subtitle language (if recorded on the DVD)
SEARCH Searches for location on disc to start playback
RANDOM Random playback
Chapter/Track down
Chapter/Track up
Play
Stop
Fast reverse
Fast forward
Pause
Opens/closes the disc tray
0, 1 to 9, +10 Numeric keys
VOL
Adjusts volume at TX-NR801/TX-NR801E
MUTING Activates muting function at TX-NR801/TX-NR801E
DVD
MODE
SETUP
ON STANDBY
TOP
MENU
DISC
ENTER,
RETURN
AUDIO
SEL
ANGLE
VOL
MUTING
MENU
SUBTITLE
SEARCH
///
DVD
operation
buttons
Numeric
keys
Note:
When operating an Onkyo DVD
player directly with the remote
controller without connecting the
terminals, pre-program-
ming is necessary (See page 82).
/ //