Filter
Top Products
32
Selecting the Appropriate Setting for Your Connections—Continued
After you have installed the TX-NR801/TX-NR801E,
connected all the components, and determined the
speaker layout, it is now time to perform the settings in
the Speaker Setup Menu to optimize the sound acoustics
for your environment and speaker layout.
Before you perform the following settings, it is
important that you first determine the following items:
• The types and sizes of the speakers that are connected.
• The distance from each speaker to the normal
listening position.
Note:
When “Large” is set, the complete frequency range for
that speaker channel will be output. When “Small” is set,
the frequencies below 80 Hz for that speaker channel are
output to the subwoofer. If there is no subwoofer, then
they will be output to the left and right front speakers.
(Set all speakers for THX speaker systems to “small.”)
If you want to perform these operations using the remote
controller, first press the RCVR button.
Speaker Setup
DSP
A
-
FO
RM LISTENING MODE MEMORY
THX
SURROUNDDIRECT
/
PURE AUDIOSTEREO
FM
MODE
MEMORY
ENTER
RE
TURN
SETUP
TUNING
PRESET
SETUP/ENTER/
RETURN/Cursor
/ //
[ENTER]Quit:[SETUP]
Basic Menu
0.Hardware Setup
1.Speaker Setup
2.Input Setup
3.Audio Adjust
→
Advanced Menu
1.Speaker Setup
1.Speaker Config
2.Speaker Distance
3.Level Calibration
[ENTER]Quit:[SETUP]
SL SR
SBL SBR
Front
Front
Left
Left
Front
Front
Right
Right
Front
Left
[ ]
m/ft
[ ]
m/ft
[ ]
m/ft
[ ]
m/ft
[ ]
m/ft
[ ]
m/ft
[ ]
m/ft
[ ]
m/ft
Front
Right
SW Center
Monitor
1
Display the main menu.
Press the SETUP button on the front panel or
SETUP button on the remote controller to display
the main menu on the monitor and front display.
2
Use the and cursor buttons to select
“1. Speaker Setup” and then press the
ENTER button.
The “Speaker Setup” menu appears.
3
Use the and cursor buttons to select
an item and then press the ENTER button.
4
Use the and cursor buttons to select
an item and then use the and cursor
buttons to set the desired value.
5
Press the SETUP button to exit the Setup
menu.
Press the RETURN button to return to the previ-
ous menu.
Memo: