Filter
Top Products
10
Index Parts and Facilities
—Continued
To select an input source, press the desired button
(REC OUT or ZONE 2) and then press one of the
input source button within 8 seconds. That source will
be output for recording or viewing in the remote zone.
To set the output to the source channel, press the
desired button (REC OUT or ZONE 2) twice in suc-
cession. To turn off the output, press the desired but-
ton (REC OUT or ZONE 2) and then press the OFF
button within 8 seconds.
Note:
The Rec Out and Zone 2 buttons use the same cir-
cuit and therefore cannot be used at the same time.
When REC OUT is selected, nothing is output to
Zone 2. When ZONE 2 is selected, REC OUT is
automatically fixed to SOURCE.
H
SETUP button [29]
Press to enter the Setup Menu. The OSD Menu will
appear on the TV monitor as well as the front dis-
play on the TX-NR801/TX-NR801E.
I
ENTER button [29, 49]
Press to display the screen for the item that is
selected in the Setup Menu.
J
RETURN button [29]
In the Setup Menu, press to go back one level. If
pressed while at the Main Menu, you will exit the
Setup Menu.
K
MASTER VOLUME dial [39, 65]
Use to control the volume in the main zone. The vol-
ume for the remote zone (Zone 2) is independent.
L
VIDEO 5 INPUT terminals [23]
For connecting a video camera or game device.
M
Input source buttons and indicators (DVD,
VIDEO 1–5, TAPE, TUNER, PHONO, CD, and
NET AUDIO) [35, 36, 39]
Press these buttons to select the input source for the
main zone.
To select the input source for the remote zone (Zone
2) or recording out (REC OUT), first press the
ZONE 2 or REC OUT button, and then press the
desired input source button. The input channel with
its indicator lit
red
is output to REC OUT and the
one with its indicator lit
green
is output to ZONE 2.
N
UPSAMPLING indicator [55]
Lights during upsampling. This function is available
when the input source is Analog/PCM and the lis-
tening mode is set to the stereo or surround mode.
O PHONES jack [39]
This is a standard stereo jack for connecting stereo
headphones.
P PURE AUDIO indicator [44]
Lights during pure audio playback.
A Input signal path indicators
Shows from which terminal the input signal is com-
ing.
B Listening mode or digital input format
indicators
One of these indicators lights to show the format of
the current input source. In addition, one of the lis-
tening mode indicators lights to indicate the current
listening mode.
C Tuning indicators
AUTO indicator
Lights when receiving FM broadcasts in the stereo
mode. Turns off when placed into the monaural
mode.
RDS indicator (European models only)
Lights when an RDS station is being received.
TUNED indicator
Lights when a radio station is being received.
FM STEREO indicator
Lights when an FM broadcast station is being
received in stereo. Turns off when placed into the
monaural mode.
D Multi function display
During normal operation, shows the current input
source and volume. When the FM or AM input is
selected, shows the frequency and preset number.
When the DISPLAY button is pressed, shows the
listening mode and input source format. However,
does not show the source format when the FM or
AM source is selected.
E Volume display
Shows the volume level.
F SLEEP indicator
Lights when the sleep timer is turned on.
Front Panel Display