Filter
Top Products
36
Configuring Input Settings Suitable for Your Connections—Continued
If the default input settings do not suit your connec-
tions, perform the following procedures to configure
your input settings.
The settings made in this menu are valid for the input
source that is currently selected with the input source
buttons on the front panel and, therefore, these settings
are made separately for each input source.
For details on the Input Setup settings when NET
AUDIO is selected as the input source, see page 74.
If you want to perform these operations using the remote
controller, first press the RCVR button.
Digital Setup Sub-menu
(When NET AUDIO, FM, or
AM is not selected as the input source)
This sub-menu concerns the input of digital signals
from input sources and if these settings are incorrectly
made, the digital audio signals may not be properly out-
put, or not heard at all. This sub-menu cannot be
selected if the selected input source button is AM, FM,
or NET AUDIO. It is not accessible if “Yes” is selected
in 2-2. Multichannel Setup Sub-menu and “Multichan-
nel” is selected in the AUDIO SELECTOR. Further-
more, VIDEO 5 is fixed to the optical digital terminal
on the front panel.
Initial settings for each input source
----: Available for digital input but not set in initial settings.
: Not available for digital input.
Input Setup
1
Press the input source button (or INPUT
SELECTOR button on the remote
controller).
2
Display the main menu.
Press the SETUP button on the front panel or
SETUP button on the remote controller to display
the main menu on the monitor and front display.
3
Use the and cursor buttons to select
“2. Input Setup” and then press the
ENTER button.
The “Input Setup” menu appears.
4
Use the and cursor buttons to select
an item and then press the ENTER button.
DSP
A
-
FO
RM LISTENING MODE MEMORY
THX
SURROUNDDIRECT
/
PURE AUDIOSTEREO
FM
MODE
MEMORY
ENTER
RE
TURN
SETUP
TUNING
PRESET
SETUP/ENTER/
RETURN/Cursor
/ //
Input source buttons
Basic Menu
0.Hardware Setup
1.Speaker Setup
2.Input Setup
3.Audio Adjust
→
Advanced Menu
[ENTER]Quit:[SETUP]
2.Input Setup
1.Digital Setup
2.Multichannel Setup
3.Video Setup
4.Character Input
5.IntelliVolume
[ENTER]Quit:[SETUP]
Input:DVD
5
Use the and cursor buttons to select
an item and then use the and cursor
buttons to set the desired value.
6
Press the SETUP button to exit the Setup
menu.
Press the RETURN button to return to the previ-
ous menu.
Input source Digital input
CD OPT 1
PHONO ----
TUNER
TAPE OPT 2
VIDEO 1 COAX 2
VIDEO 2 COAX 3
VIDEO 3 OPT 3
VIDEO 4 ----
VIDEO 5 FRONT (fixed)
DVD COAX 1
NET AUDIO
2-1.Digital Setup
a.Digital Input
:COAX1
b.Digital Format
:All
Quit:[SETUP]
Input:DVD