Filter
Top Products
49
Listening to RDS Broadcasts (European models only)—Continued
If the station you are currently tuned into is broadcasting
RT signals, they will be displayed in the front display on
the TX-NR801E. If the station does not, this function
will be ignored.
• If the current station you are listening to is not an RDS
station, only the frequency of the station will appear.
• If “Waiting” appears on the display, more time is
required to receive the RT information. When the
information is received, the characters will scroll
across the front display.
• If “No Text Data” appears on the display, RT informa-
tion is not available.
• The display shows the frequency for 3 seconds and
returns to program service name.
Displaying Radio Text (RT)
To display the radio text, press the
RT/PTY/TP button once.
Performing a PTY Scan
1
Press the TUNER input source but-
ton and select the FM input
source.
2
Press the RT/PTY/TP button twice.
The current program type appears on the
display.
3
Using the PRESET / buttons,
select the PTY program type you
desire.
DSP
A
-
FO
RM LISTENING MODE MEMORY
THX
SURROUNDDIRECT
/
PURE AUDIOSTEREO
FM
MODE
MEMORY
ENTER
RE
TURN
SETUP
TUNING
PRESET
PRESET /
TUNERRT/PTY/TP ENTER
RT/PTY/TP
TUNER
RT/PTY/TP
TUNI NG
PRESET
4
Press the ENTER button.
The TX-NR801E will scan until it
reaches a station of the program type you
selected. It will then stop briefly at that
station before continuing on until it
reaches the next station. Pressing the
ENTER button stops the PTY scan at that
point. If you press the RT/PTY/TP while
“NONE” is displayed, “PTY ?” will
appear. In this case, return to step 3.
5
Press the ENTER button when it
reaches the station that you want
to listen to.
“Not Found” will appear when no RDS
signal is being received from the station.
Performing a TP Scan
1
Press the TUNER input source but-
ton.
2
Press the RT/PTY/TP button three
times.
“[TP]” will appear if the current station
is broadcasting TP signals. This station
will periodically broadcast traffic infor-
mation. To find a different station, pro-
ceed to the next step. Also, if “TP” is
displayed, proceed to the next step.
3
Press the ENTER button.
The TX-NR801E will scan until it
reaches a station broadcasting traffic
information. If “Not Found” appears on
the display, a TP station cannot be
located.
ENTER
ENTER
TUNER
RT/PTY/TP
ENTER