RT-20 Universal Disc Player Playback Modes
4-9
PLAYBACK MODE DESCRIPTIONS
The RT-20 offers a range of playback modes that can be used to
control playback of the loaded disc. The “Playback Modes Table”
on page 4-10 indicates the playback modes available for each disc
format.
Except for the Playback mode described below, assume that play-
back is activated before the command is entered.
PLAYBACK (PLAY)
Use the front panel or remote control PLAY button to activate play-
back of the loaded disc at regular playback speed. In some cases,
the remote control number buttons can also be used to activate
playback of a specific title, chapter, group, or track.
The PLAY button may not activate playback when the disc menu is
open on the on-screen display.
Some discs automatically activate regular playback when switching
titles, chapters, groups, or tracks, even if a different playback mode
(i.e. random playback) was activated before the switch.
When playback is activated, the remote control and buttons
might stop functioning. To restore functionality, press the STOP
button to activate stop mode. In some cases, the STOP button
must be pressed twice in succession to activate stop mode. Then,
press the PLAY button to reactivate playback.
When playback of an MP3 track is activated, the name of the track
appears on the front panel display for the first 5 seconds of play-
back.
To activate playback:
Press the PLAY button.