Playback Modes Lexicon
4-6
SUBTITLE LANGUAGES
Opens a Subtitle bar as shown to the right, which can be used to
select the desired subtitle language.
Subtitle language selection is available for DVD-Vs recorded with
subtitles. Subtitle language selection is not available for other disc
formats or for discs that are not recorded with subtitles. In addition,
subtitle language selection is not available unless playback is acti-
vated.
Subtitle language selection has no effect on the Subtitle Language
parameter setting.
To set Subtitle preference, see “Subtitle Language” on page 3-5.
To select a subtitle language when a disc is playing:
1. Press the SUBTITLE button to open the Subtitle bar.
The Subtitle bar indicates the language in which the selected
subtitles were recorded. For instance, the Subtitle bar shown to
the right indicates that the selected subtitle was recorded in
English. It also indicates that the selected language is one of
two that are available.
If the Subtitle bar does not open at the top of the on-screen
display, subtitle language selection might not be available for
the loaded disc.
2. To select the desired subtitle language, use the cursor arrow
buttons to scroll through the available languages. The current
subtitle language is displayed on-screen.
Select Subtitle Off to prevent subtitles from appearing on the
on-screen display during playback.
Note:
The Subtitle bar automatically closes immediately after the last command
is received. When this occurs, playback will activate using the selected
subtitle language. If no command is selected, the bar closes after approxi-
mately ten seconds.
3. When the desired subtitle language is selected, press the
remote control ENTER button to activate playback using the
selected subtitle language.
CAMERA ANGLES
Opens the Angle bar, which can be used to select the desired cam-
era angle.
Camera angle selection is available for DVD-V scenes recorded from
multiple camera angles. Camera angle selection is not available for
other disc formats or for DVD-V scenes recorded from one camera
angle. In addition, camera angle selection is not available unless
playback is activated.
The Angle Indicator parameter activates and deactivates the indica-
tor. See “Angle Mark” on page 3-26. When set to On, the indicator
appears on the front panel display when playback of a scene
01/02 ENG