Filter
Top Products
Setup Lexicon
3-22
COMPONENT OUT
Controls component video output format when the RT-20 is using
the component video output connectors. Select Progressive if the
associated component provides a progressive-scan component
video input connector. Select Interlaced if the associated compo-
nent does not provide a progressive-scan component video input
connector.
When Progressive is selected:
• The picture will not appear on the display device screen if the
associated component does not provide a progressive-scan
component video input connector. To correct this, set the
Component Out parameter to Interlaced and configure the
RT-20 for a different video output connection to the associated
component.
• The RT-20 converts video sources recorded on film to 60
frames-per-second to create a more natural picture. See “Pro-
gressive Motion” on page 3-37 for more information.
Note:
The RT-20 is not compatible with all high-definition display devices.
Connecting the RT-20 to a non-compatible high-definition display
device can produce video artifacts in the picture.
PAUSE MODE
Controls the appearance of still frame images. When Field is
selected, the RT-20 produces tight, stable, and generally shake-free
still frame images. When Frame is selected, the RT-20 produces
sharper, but shakier still frame images. When Auto is selected, the
RT-20 automatically selects the best viewing method for still frame
images.
BACK GROUND
Determines the background of the screen when stop mode is acti-
vated. The default background is Logo, which displays the Lexicon
logo. Select Capture if you want to save a JPEG file as your back-
ground image. See “Saving a JPEG file for use as Screen back-
ground (JPEG CAPTURE)” on page 4-13 for more information.
SCREEN SAVER
Activates/deactivates the Lexicon screen saver. When On is
selected, the Lexicon screen saver appears on the on-screen display
when a still frame image is displayed for more than 15 minutes.
When Off is selected, the Lexicon screen saver does not appear on
the on-screen display.
Note:
Still frame images displayed on cathode ray tube (CRT) display devices
for long periods of time can “burn in” or create “ghost images” on the
screen. When the RT-20 is connected to a CRT display device, it is rec-
ommended to set the Screen Saver parameter to On to prevent the
appearance of “ghost images” on the screen.
TV SYSTEM
If you experience a distorted picture, set this parameter to match
your region or Country setting. Setting this parameter may restrict
the kinds of discs you will be able to use. Use the default setting
Multi, unless there is picture distortion. The “TV System Disc Com-
patibility Table” on page 3-23 lists the kinds of discs compatible
with the three settings.