Filter
Top Products
RT-20 Universal Disc Player Basic Operation
2-9
Note:
When shipped, the trigger input connector is located in the remote
control bag. Remove the trigger connector from the bag and insert into
the rear panel.
7 TRIGGER INPUT SWITCH
Enables and disables trigger control when the trigger input connec-
tor on the RT-20 is connected to the trigger output connector on
an associated component. Whenever the trigger input switch is set
to ON, the remote control POWER button cannot be used to activate
and deactivate standby mode.
Note:
The trigger input switch setting does not take effect until the RT-20 is
power cycled with the front panel On/Off button. If the trigger switch is
turned on while the RT-20 is ON, the RT-20 will go into Standby mode.
The remote control power button cannot be used.
8 HDMI OUTPUT CONNECTOR
Provides HDMI output. Connect to a HDMI compatible display
device. HDMI provides uncompressed digital video and audio for
the highest quality image and sound. HDMI supports all existing
high-definition formats (720p and 1080i). It also supports
enhanced definition formats such as 480p and standard formats
such as NTSC or PAL. HDMI video and audio is transmitted through
a single cable.
9 RS-232C CONNECTOR
Enables connection to an external device such as a custom control-
ler or computer.
10 S-VIDEO OUTPUT CONNECTOR
Provides S-video output. All versions include one S-video connector
labeled S2.
11 COMPOSITE VIDEO OUTPUT CONNECTORS
Provide composite video output. All versions include two RCA con-
nectors labeled VIDEO. Both composite video output connectors
can be used at the same time.
12 TV A/V EUROCONNECTOR
Provides composite, S-video, or RGB video and two channels of
audio output. Some versions include one SCART connector labeled
TV A/V EUROCONNECTOR. The Video Out parameter controls
video output format when the RT-20 is using this connector.
13 AC INPUT CONNECTOR
Provides power to the RT-20 through the supplied power cord
(2 wire, 10 amp, IEC 320). The supplied power cord features the
appropriate male-end connector for the region of purchase.
CAUTION!
Never make or break connections to the RT-20 unless the
RT-20 and all associated components are powered off.