Filter
Top Products
88
CrdRetry
The card cannot be detected correctly, or is in a state in
which access is not possible.
→ Insert a card. If a card is already inserted, turn off the
power, re-insert the card, and then turn the power on
once again.
Finish!
The operation was completed successfully.
SongFull
You have exceeded the maximum number of songs
that can be stored in a card.
→ Delete unwanted songs, or use another card.
Working.
An operation is being performed. Please wait until
this message disappears.
Error messages
Card#@@@
The card could not be accessed correctly. (@@@ will
indicate a number.)
→ Execute “CdRecvry” (→p.55). If an error message still
appears, use “CdFormat” (→p.55) to format the card.
>>Card<<
An editing operation such as “CopyTrk” or “Copy-
Song” could not be executed due to insufficient free
space on the card.
→ Execute “CdRecvry” (→p.55). If an error message still
appears, use “DelV-Trk” (→p.50) to delete unneeded
tracks. If it is still not possible to execute the operation,
delete unneeded songs.
CardFull
There is not enough space on the card for recording.
→ Execute “CdRecvry” (→p.55). If an error message still
appears, and you do not mind being unable to Undo
the previous operation for that song, execute
“DelUndo” (→p.57) for that song. Alternatively, if you
do not mind being able to Undo previous operations
for all songs, execute “DelUndo” for “All.” If this does
not increase the free space sufficiently, use “DelV-Trk”
(→p.50) to delete unneeded tracks. If there is still not
enough space, delete unneeded songs.
CrdSpeed
This will appear if the card cannot be read or written
fast enough during playback or recording.
→ Use the “Full” (complete) setting to format the card
before using it.
Done OK?
Undo will not be possible; execute anyway?
→ This will be displayed after a warning of “UndoOver.”
“Yes” will execute and save to the card, or “No” will
cancel execution and will not save to the card.
EtryFull
The song cannot be created or renamed or the effects
saved, because no more files can be created on the card.
→ Use Delete Song to delete unneeded songs.