Filter
Top Products
20
Quick start
If you just can’t wait to get started, this section will explain
how to connect your guitar, record your playing on one track,
and then play it back.
1. Preparations
Insert the card
Insert the card (CompactFlash) into the card slot.
(→p.16)
The CompactFlash card that came with your D4 is
already formatted and contains the demo songs. How-
ever, if you are using a new CompactFlash card, you
will need to format it before you begin recording.
(→p.55)
If you format the CompactFlash card that was included
with the D4, you will lose all the demo data (demo song
and effect data) that it contained.
Connect your guitar
Connect a shielded cable (mono phone plug) to your
guitar. Connect the other end of the cable to the D4’s
[INPUT1] jack.
Set the D4’s [INPUT1] switch to GTR.
Connect your headphones
Connect your headphones to the D4’s [PHONE] jack.
Set the [PHONE LEVEL] knob to 0.
If you want to connect an amp or audio system, refer to
p.15.
2. Turn the power on
Connect the AC adapter
Connect the included AC adapter to the [DC 9V] jack.
Set the [MASTER] fader to “0”
Lower the D4’s [MASTER] fader.
Turn the power on
Turn on the [POWER] switch located on the rear panel
of the D4, and the start-up screen will appear in the
display.