Filter
Top Products
70
PAN: pan
You can use the D4’s knobs to adjust the pan and sends,
edit the effects, and adjust amp settings as easily as when
using an analog mixer or effect processor. The function of
the knobs is switched automatically according to the
mode you select. Then you can press the [SEL] key and
use the knobs for other functions.
When a master type effect is selected
The [SEL] key switches the [PAN] knobs’ function
between AMP/FX, PAN, and SEND.
When an effect other than a master type effect is selected
The [SEL] key switches the [PAN] knobs’ function
between AMP/FX and PAN.
If you’re not using the master effect (i.e., when the [MAS-
TER] key is unlit), you can’t select SEND.
When you select a mode, the function of the [PAN] knobs
will automatically switch to the following functions.
1. Effect mode AMP/FX EDIT
2. PAN
PAN: adjust the pan (stereo position)
This lets you adjust the pan (stereo position) of each track.
If you turn a knob while the counter is shown in the dis-
play, the parameter and its value will be shown for a cer-
tain length of time.
1. Pan ..................................................................................
1a. Pan 1 .................................................[L30...cnt...R30]
1b. Pan 2 .................................................[L30...cnt...R30]
1c. Pan 3.................................................. [L30...cnt...R30]
1d. Pan 4 ................................................. [L30...cnt...R30]
RTM LVL: adjust the rhythm level
When the PAN function is selected, the knob located above
the master fader will adjust the rhythm level. This is the same
setting as the “RhythmLv” parameter of “RHYTHM” mode.
1e. RhythmLv.........................................................[0...50]
SEND: adjust the send level
Here you can adjust the send level from each track to the
master effect. If you turn a knob while the counter is
shown in the display, the parameter and its value will be
shown for a certain length of time.
This SEND function is only available when a Master type
effect is selected.
1. Send.................................................................................
1a. Send 1...........................................................[0...100]
1b. Send 2...........................................................[0...100]
1c. Send 3...........................................................[0...100]
1d. Send 4...........................................................[0...100]
RETURN: adjust the return level
If you’ve selected the SEND function, the knob located
above the master fader will adjust the return level from
the master effect. This is the same setting as the “FxRetLv”
parameter of the master effect.
1e. FxRetLv..........................................................[0...100]