Introduction
15
Connections
The diagram below shows basic connections for the D4.
Adapt these instructions as appropriate for your equip-
ment, and make the necessary connections.
The power must be turned off while you make connections.
1. Input
Set the [INPUT 1] and [INPUT 2] switches appropriately
for the input device you’ve connected. (→p.11)
Connecting a guitar
Connecting a line-level device
Connecting a mic (to the XLR jack)
2. Output
[INPUT 1] GTR
[INPUT 2] LINE
[INPUT 1] LINE
CD player, cassette deck, etc.
OUTPUT L/R
2:HOT
1:GND
3:COLD
Mic
[INPUT 2] (MIC) EXT
[MASTER OUT]
Powered monitor
speakers, etc.