Filter
Top Products
Effect parameters
69
P.10 FxRetBal: effect return balance setting
Press the CURSOR [ ] key to select this parameter.
1. FxRetBal ...................................................[L30...cnt...R30]
If you’ve selected MASTER as the effect type, this parame-
ter adjusts the stereo balance of the return from the effect
to the master bus.
This page won’t appear if you’ve selected an effect type
other than “MASTER.”
P.11 Rename: edit the name of the effect
Press the CURSOR [ ] key to select this parameter.
RenameFx ..............................................................................
Use the CURSOR [ ]/[ ] keys to select the character
you want to edit, and use the [VALUE] dial to change that
character. When you save the effect, it will be saved with
this name.
To save the effect, press the FX WRITE [PROG] key.
FX WRITE/PROG: save an effect
1. WriteNum..........................................................[U00...99]
Here you can select the save-destination user program
number. This is the user program number into which the
effect program you edit will be written and stored.
For details, refer to “3. Saving an effect program” in “Step
7. Using effects” of the Operation section.
FX WRITE/KNOB: register an effect
to the Favorites knob
1. KnobPosi.............................................................[01...11]
Select the knob position that you want to use to register a
favorite effect. The currently selected effect program will
be registered to the knob position you specify here.
For details, refer to “4. Using the Favorites knob” in “Step
7. Using effects” of the Operation section.