Filter
Top Products
Quick start
21
3. Create a new song
Set the [MODE] knob to “NEW SONG”
If no songs have been recorded on the card, then
“MakeNew!” will appear automatically.
Specify the song grade
The display indicates “SngGrade.”
Use the [VALUE] dial to select the grade (recording
quality) of the new song you’re going to create.
Create the song
Press the CURSOR [ ] key. An empty song named
“NEW SONG” has now been created.
Press the [EXIT] key
The D4 will be in Play mode.
4. Assign the input
Press the TRACK ASSIGN [1] key
The key will light.
Select the recording track
By default, track 1 is automatically selected as the
recording track; the TRACK ASSIGN [1] key and REC
SELECT [1] LED will light. If you want to select a track
other than track 1 as the recording track, press the
[PAN] knob corresponding to that track to select it.
Set the input level
Adjust INPUT LEVEL [1] as you watch the LED. Set
the level as high as possible without letting the LED
light red.
Set the monitoring level
Gradually raise the [TRACK 1] fader as you watch the
level meter [1], and make sure that you are hearing
sound. Use the [MASTER] fader and [PHONE] knob
to adjust the monitor volume.