Korg D4 Stereo System User Manual


 
10
bus. During playback, the sound is output from the
[MASTER OUT] jacks at the volume specified by this
fader. If you’ve selected “BOUNCE,” “MASTERING,”
or “MP2” as the “REC MODE,” this fader adjusts the
overall recording level of the tracks selected by “REC
SELECT.”
15.[VALUE] dial
Use this to select parameters or edit their values.
Pressing down on this dial has the same result as
pressing the CURSOR [ ] key.
16.[MODE] knob
Use this knob to select a specific mode. (p.24)
17.[EXIT] key
This key returns you to a specific page for each mode
or page. Press it to cancel the selected operation when
editing (i.e., when the “EDIT” indication is lit), or to
return from Effect or Tuner mode to the mode selected
by the [MODE] knob.
18.[STORE] key
Press this key to register a specific point in the song
(time location) to the [IN (LOC1)] or [OUT (LOC2)]
(locate point) keys. When renaming a song, press this
key to assign the name and store the song. For details
on how to register a time location, refer to “3. Using
locate points to change the time” in “Step 5. Viewing
and changing the time” of the Operation section.
19.[IN (LOC1)], [OUT (LOC2)] (locate point) keys
Pressing these keys moves the song to their stored time
location. After pressing the [STORE] key, press one of
these keys to store the current time location to that key.
In the auto-punch record mode (the [PUNCH] key will
be lit), recording will automatically begin and end
(punch-in/out) at the times specified by these keys.
The times registered to these keys are also used for
track editing (“TRK EDIT” mode) and for auto-punch
recording (See “Step 3. Re-recording a specified time
region of a track: Auto punch-in/out.”) For details on
how to register a time location, refer to “3. Using
locate points to change the time” in “Step 5. Viewing
and changing the time” of the Operation section.
20.[PUNCH] key
This key turns auto-punch recording on/off.
On (key lit): Auto-punch recording .
Off (key unlit): Conventional recording.
For details on using auto-punch recording, refer to
“Re-recording a specified time region of a track: Auto
punch-in/out” in “Step 3. Recording” of the Opera-
tion section.
21.CURSOR [ ], [ ] keys
Use these keys to move between pages in the display.
The key(s) will light to indicate the direction(s) in
which it is possible to move.
22.[SEL] key
Use this key to select the function of the [PAN] knobs.
The display shows the currently selected function.
23.TRANSPORT keys
Use these keys to operate the recorder (e.g., play, record).
PLAY
This plays the currently selected song.