Filter
Top Products
Operation
25
Tuner
Press the TRACK ASSIGN [1] key and [2] key simulta-
neously to access the Tuner sub-mode. Next, use the
TRACK ASSIGN [1] key or [2] key to select the input
([INPUT 1] or [INPUT 2]) signal that you want to send to
the tuner.
Punch Rec
Press the [PUNCH] key to select the Punch Rec sub-mode
if you want to use auto-punch recording. Auto-punch
recording will occur from the time location specified by
the [IN (LOC1)] key to the time location specified by the
[OUT (LOC2)] key.
2. Selecting and editing parameters
Selecting a parameter
After you’ve selected a mode using the [MODE] knob, use
the [CURSOR] keys to move to the page containing the
parameter that you wish to edit.
The page guide indication shows whether more pages
exist in each direction. To move to another page, press the
[CURSOR] key for that direction.
Editing a parameter
If the displayed page contains a parameter whose value
you can edit, the value display will blink and the edit icon
will appear. Turn the [VALUE] dial to edit the parameter.