Denon DN-500AV Home Theater System User Manual


 
92
Communication protocol
nq Controlling and operating this unit from the
host
When this unit receives a control command from the host, the unit
executes the command.
Handshake flow charts for control command
This unit Host
Control command
•For “Control command code table” (vpage93).
nw Sending the status information for a status
request command from the host
When this unit receives a status request command from the host,
the unit responds the status information.
Handshake flow charts for status request command
This unit Host
Status request
command
Status
information
command
•For “Status request and status information code table”
(vpage102).
ne Automatically sending the status information
when there is a change to the unit status
When there is a change to the unit status, this unit automatically
sends the status information to the host.
Handshake flow charts for status command
Status
command
This unit Host
•The commands used for sending status information are the same as
the status information commands used for
w.
For “Status request and status information code table” – “Status
information command and Status command” (vpage102) .
Basic version
Advanced version
Information
Advanced version
BD