106
Status request command (Host ! This unit)
Status information command and Status command
(This unit ! Host)
REMARKS
Request. Command CONTENTS Command
PARAMETER setting
AFDM PSAFD ?<CR>
ON PSAFD ON<CR>
OFF PSAFD OFF<CR>
PANORAMA PSPAN ?<CR>
ON PSPAN ON<CR>
OFF PSPAN OFF<CR>
DIMENSION PSDIM ?<CR>
Direct change to zzdB PSDIM zz<CR>
zz:00 to 99 by ASCII, 00=0,
from 0 to 6
CENTER WIDTH PSCEN ?<CR>
Direct change to zzdB PSCEN zz<CR> zz:00 to 99 by ASCII, 00=0 (from 0 to 7)
CENTER IMAGE PSCEI ?<CR>
Direct change to zzdB PSCEI zz<CR>
zz:00 to 99 by ASCII, 00=0.0
from 0.0 to 1.0
SW PSSWR ?<CR>
ON PSSWR ON<CR>
OFF PSSWR OFF<CR>
ROOM SIZE
direct change
PSRSZ ?<CR>
S PSRSZ S<CR>
MS PSRSZ MS<CR>
M PSRSZ M<CR>
ML PSRSZ ML<CR>
L PSRSZ L<CR>
AUDIO DELAY PSDELAY ?<CR>
Direct change to zzdB PSDELAY zzz<CR>
zzz:000 to 999 by ASCII, 000=0ms, 200=200ms
from 0 to 200
AUDIO
RESTORER direct
change
PSRSTR ?<CR>
OFF PSRSTR OFF<CR>
MODE1 PSRSTR MODE1<CR>
MODE2 PSRSTR MODE2<CR>
MODE3 PSRSTR MODE3<CR>
Communication protocol
Basic version
Advanced version
Information
Advanced version
BD