62
Audio Adjust
Tone
Adjust the tonal quality of the sound.
Setting items Setting details
Tone Control
Set the tone control function
to “ON” and “OFF”.
ON : Allow tone adjustment (bass, treble).
OFF : Playback without tone adjustment.
NOTE
•“Tone Control” settings are not reflected to ZONE2.
•The tone cannot be adjusted in the “DIRECT” mode.
Bass
Adjust low frequency range
(bass).
–6dB – +6dB
“Bass” can be set when “Tone Control” is set to “ON”.
Treble
Adjust high frequency range
(treble).
–6dB – +6dB
“Treble” can be set when “Tone Control” is set to “ON”.
Manual EQ
Default settings are underlined.
Usethegraphicequalizertoadjustthetoneofeachspeaker.
Setting items Setting details
Adjust Channel
Correct the tone of each
speaker.
q Select the speaker tone adjustment method.
All : Adjust the tone of all speakers together.
L/R : Adjust the tone of left and right speakers together.
Each : Adjust the tone of each speaker.
w Select the speaker.
e Select the adjustment frequency band.
63Hz/125Hz/250Hz/500Hz/1kHz/2kHz/4kHz/8kHz/16kHz
•Selectthe speakersyou wantto adjustwhen “L/R”or “Each”is
selected.
r Adjust the level.
–20.0dB – +6.0dB (0.0dB)
Default
The “Manual EQ” settings
are returned to the default
settings.
Yes : Reset to the defaults.
No : Do not reset to the defaults.
When you select “Default” and press ENTER,
the “Return settings to the default?” prompt
is displayed. Select either “Yes” or “No”, and
press ENTER.
RESTORER
Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the
amount of data by eliminating signal components that are hard for the human ear to hear. The RESTORER
function generates the signals eliminated upon compression, restoring the sound to conditions near those
of the original sound before compression. It also corrects the sense of volume of the bass to obtain richer
sound with compressed audio signals.
Setting details
OFF : Do not use RESTORER.
Mode1(RESTORER64):Optimizedmodeforcompressedsourceswithveryweakhighs.
Mode2 (RESTORER 96) : Apply suitable bass and treble boost for all compressed sources.
Mode3(RESTORERHQ):Optimizedmodeforcompressedsourceswithnormalhighs.
•ThisitemcanbesetwithanalogsignalsorPCMsignal(fs=44.1/48kHz)isinput.
•“RESTORER” settings are stored for each input source.
•Thisitemdefaultsettingfor“iPod”and“NET/USB”is“Mode3”.Allothersaresetto“OFF”.
•When set to something other than “OFF”, is displayed.
•This cannot be set when the surround mode is set to “DIRECT” or “PURE DIRECT”.
Audio Delay
Default settings are underlined.
While viewing video, manually adjust the time to delay audio output.
Setting details
0ms – 200ms
•This item can be set within the range of 0 to 100 ms when “Auto Lip Sync”(vpage68) is set to
“ON” and when a TV compatible with Auto Lip Sync is connected.
•Store “Audio Delay” for each input source.
•Audio Delay for game mode can be set when “Video Mode” (vpage 79) is set to “Auto” or
“Game”.
Basic version
Advanced version
Information
Advanced version
BD