Filter
Top Products
6
Important information
Examples of screen display
•Menu screen •Status display screen
When the input source is
switched.
When the volume is adjusted.
Audio Adjust
Information
Setup Wizard
System Setup
Input Setup
Surr.Parameter
Tone
Manual EQ
RESTORER
Audio Delay
Menu
SOURCE :BD
MODE
:STEREO
[Auto]
Master Volume -55.5dB
Status display: The operating status appears briefly on the screen
when the input source is switched or the volume is
changed.
NOTE
•If you operate the menu while playing back 3D video content or computer’s resolution (e.g. VGA), the
playback video is replaced by the menu screen. The playback video is not displayed behind the menu
screen.
•This unit does not show the status display while playing back 3D video content or computer’s resolution
(e.g. VGA).
•The menu screen and status display are displayed when this unit and a TV are connected by HDMI.
Furthermore, the menu screen and status display are not displayed when this unit and a TV are connected
by VIDEO and COMPONENT VIDEO.
Connecting a power amplifier
•First connect a power amplifier in order to output audio from this unit.
•Switch the output voltage with the output level selector according to the connected power amplifier.
•For how to connect this unit with power amplifier, see “Connecting a power amplifier” (C page 6) and
“Speakerinstallation/connection(Advancedconnection)”(vpage38).
NOTE
Be sure to turn the power off before setting.
Cables used for connections
Audio cable (sold separately)
XLR cable
SPEAKERS
XLR
RCA
SPEAKERS
XLR
RCA
SPEAKERS
XLR
RCA
SPEAKERS
XLR
RCA
SPEAKERS
XLR
RCA
SPEAKERS
XLR
RCA
SPEAKERS
XLR
RCA
SPEAKERS
XLR
RCA
SPEAKERS
XLR
RCA
SPEAKERS
XLR
RCA
This unit
Power amplifier
Output level
selector
Basic version
Advanced version
Information
Basic version
BD