Denon DN-500AV Home Theater System User Manual


  Open as PDF
of 139
 
73
System Setup
Option Setup
Default settings are underlined.
Make various other settings.
Setting items Setting details
Volume Control
Set the MAIN ZONE (room
where the unit is located)
volume setting.
Volume Display : Set how volume is displayed.
•Relative : Display ---dB (Min), in the range –80.5 dB to 18 dB.
•Absolute : Display in the range 0 (Min) to 99.
•The “Volume Display” setting is applied also to the “Volume Limit” and
“Power On Level” display method.
•The“VolumeDisplay”settingappliestoallzones.
Volume Limit : Make a setting for maximum volume.
•OFF : Do not set a maximum volume.
•–20dB (61)/–10dB (71)/0dB (81)
Power On Level : Define the volume setting that is active when the
power is turned on.
•Last:Usethememorizedsettingfromthelastsession.
•– – – (0) : Always use the muting on condition when power is turned on.
•–80dB – 18dB (1 – 99) : The volume is adjusted to the set level.
Mute Level : Set the amount of attenuation when muting is on.
•Full : The sound is muted entirely.
•–40dB : The sound is attenuated by 40 dB down.
•–20dB : The sound is attenuated by 20 dB down.
Source Delete
Remove from the display
input sources that are not
used.
BD / DVD / TV / SAT/CBL / GAME1 / GAME2 / V.AUX / DOCK /
NET/USB/CD : Select input source that is not used.
•ON : Use this source.
•Delete : Do not use this source.
NOTE
•Inputsourcesbeingusedinthevariouszones
cannot be deleted.
•Input sources set to “Delete” cannot be
selected using the input source select button.
ZONE2 Setup Default settings are underlined.
Settheaudiotoplaybackwithmulti-zone(ZONE2).
“ZONE2 Setup” is displayed when “ZONE2” is selected with “Amp Assign” (vpage65).
Setting items Setting details
Lch Level
Adjust the left channel
output level.
–12dB – +12dB (0dB)
Rch Level
Adjust the right channel
output level.
–12dB – +12dB (0dB)
Volume Limit
Make a setting for
maximum volume.
OFF : Do not set a maximum volume.
–20dB (61) / –10dB (71) / 0dB (81)
This is displayed from 0 to 99 when “Volume Display” (vpage73)
is set to “Absolute”.
Power On Level
Define the volume setting
that is active when the
power is turned on.
Last:Usethememorizedsettingfromthelastsession.
– – – (0) : Always mute when power is turned on.
–80dB – 18dB (1 – 99) : The volume is adjusted to the set level.
This is displayed from 0 to 99 when “Volume Display” (vpage73)
is set to “Absolute”.
Mute Level
Set the amount of
attenuation when muting
is on.
Full : The sound is muted entirely.
–40dB : The sound is attenuated by 40 dB down.
–20dB : The sound is attenuated by 20 dB down.
Basic version
Advanced version
Information
Advanced version
vSee overleaf
BD
 previous next