Denon DN-500AV Home Theater System User Manual


 
85
Registering preset codes
13
The screen shown below is displayed, and registration
of the preset code is completed.
Remote Setup Guide is finished.
Press [AMP] button. And press
[ENTER] button to return MENU.
RemoteSetupGuide
O K
•The menu screen is retrieved. Press AMP then ENTER.
14
Either of the screens below is displayed.
q
Selected code is not matched
Please try other codes.
RemoteSetupGuide
•The screen is displayed for 3 seconds, then the next preset
registration screen is displayed automatically.
w
Sorry, your remote is not
supported. This function can not
be used for your device.
Press [AMP] button. And press
[ENTER] button to return MENU.
RemoteSetupGuide
O K
GIf screen q is displayedH
The device may be operating with the preset code displayed next.
The preset registration screen is displayed. Repeat steps 9 to 12.
GIf screen w is displayedH
The device cannot be controlled with the remote control unit supplied
with this unit. Use the remote control unit supplied with the device
to be used. The menu screen is retrieved. Press AMP then ENTER.
Some manufacturers use more than one type of remote control code.
Preset codes to change the number and verify correct operation.
NOTE
Depending on the model and year of manufacture of your device,
some buttons may not operate.
Basic version
Advanced version
Information
Advanced version
BD