Filter
Top Products
20
Adjusting the master volume
Use M df to adjust the volume.
n When the “Volume Display” setting
(vpage73) is “Relative”
GAdjustable rangeH
– – –
–80.5dB – 18.0dB
n When the “Volume Display” setting (vpage73) is
“Absolute”
GAdjustable rangeH
0.0 – 99.0
•The variable range differs according to the input signal and channel
level setting.
You can also operate via the main unit. In this case, perform the
following operations.
Turn MASTER VOLUME to adjust the volume.
Turning off the sound temporarily
Press N.
•The power indicator flashes green.
•“MUTE” indicator on the display lights.
• appears on a TV screen.
•The sound is reduced to the level set at “Mute Level” (vpage73).
•To cancel, press N again. Muting can also be canceled by adjusting
the master volume.
Playing a Blu-ray Disc player/DVD
player
ThefollowingdescribestheprocedureforplayingBlu-rayDiscplayer/
DVD player.
1
Prepare for playback.
q Turn on the power of the TV,
subwoofer and player.
w Change the TV input to the input of
this unit.
e Load the disc in the player.
2
Press ON to turn on power to the
unit.
3
Press BD or DVD to switch an input source for a
player used for playback.
4
Play the device connected to this unit.
Make the necessary settings on the player (language setting,
subtitles setting, etc.) beforehand.
Playing a CD player
The following describes the procedure for playing CD player.
1
Prepare for playback.
q Turn on the power of the subwoofer
and player.
w Load the disc in the player.
2
Press ON to turn on power to the
unit.
3
Press CD to switch the input
source to the CD player.
4
Play the device connected to this unit.
Important information
Basic version
Advanced version
Information
Basic version
BD