A SERVICE OF

logo

19
Time
cycles through the four time display modes:
time elapsed on track
time elapsed on disc
time remaining on track
time remaining on disc
Prog
(for Program) allows you to quickly and easily create a
Prog
(for Program) allows you to quickly and easily create a Prog
programmed sequence of tracks (or chapters) to be played on the
current disc. Pressing
Prog
will take you directly to the program
Prog
will take you directly to the program Prog
page of the menu system, regardless of where you might be.
Once on the program page, you can change the highlighted track
using the
Up
and
Down
buttons, and can use the
Enter
button
Enter button Enter
to toggle whether it is included in the current program. Pressing
Prog
a second time returns you to wherever you had been. (Note
Prog a second time returns you to wherever you had been. (Note Prog
that the
program
function is not available during
play
or
play or play
pause
,
only when the disc player is in
stop
.)
Vol
(for Volume) buttons raise and lower the output level,
assuming you are using the analog outputs in their variable
output mode. If you set the analog outputs to their –xed,
line-level setting, or if you are using the digital output to your
preampli–er/processor, these buttons will have no effect.
Mute
will engage the mute function as you have de–ned it
(either Classic, Speci–c, or Dampening; see
The Menu System
for
The Menu System for The Menu System
more details).
3 Navigation Keys
The central section of the remote control contains the navigation keys.
This array of keys is similar to what you may have seen on remote controls
for disc players, and is used for navigation of the menu system.
Setup
serves two functions: it calls up the menu system when
you need it in order to adjust something to your preference;
once within the menu system, pressing
Setup
returns you to the
previous level of the menu system. If you press
Setup
when at
the top level of the menu system, it will take you back out of the
menu system to the normal display.
Home
restores the normal display of chapter/track, time, and
transport controls to the LCD touchscreen. This provides a
quick way to get back to normal operation, regardless of how
deep you might be in the menu system.
a note about DVD menus: The DVD standard supports two levels of menus:
a note about DVD menus: The DVD standard supports two levels of menus:
1) a menu of available “titles” on the disc (e.g., the main
movie, plus extra “bonus” materials like documentaries, etc.);
2) each “title” then has a subordinate menu of chapters
within the title.
ENGLISH