Getting started
14
Adjusting the power settings
You can conserve battery power by
adjusting the
Power
settings. During
standby, the phone goes to Sleep mode
after a specified period of time of inactivity,
so very little power is being consumed. This
helps to preserve program and data stored
in the RAM.
A lower setting increases the usable battery
time. A higher setting decreases the usable
battery time and allocates it for standby
usage.
To adjust the power settings:
1. From the
Start
menu, tap
Settings
→
System
tab
→
Power
.
2. Select the power settings:
In the
Battery
tab, check the remaining
amount of battery power.
In the
Advanced
tab, set whether or not
the phone switches to Sleep mode after
the specific period of time when the
phone is inactive and the main battery is
being used as the power source, or when
connected to an external power.
In the
Economy
tab, set the phone to
activate Power Save mode, if the phone
is not used for the specified period of
time. The phone will dim the display and
the CPU of the phone will operate at low
speed. You can set when the backlight
turns off in the
Backlight
setting. See
the next section.
In the
LCD Off
tab, set the length of time
the display stays on after a call is
established. After the specified time, the
display turns off.
3. Tap .
Adjusting the backlight settings
You can turn off or on the backlight of the
screen to reduce the power consumption.
To adjust the backlight settings:
1. From the
Start
menu, tap
Settings
.
2. In the
System
tab, tap
Backlight
.
