Filter
Top Products
Maintenance and Troubleshooting
CineWall™ Installer/Integrator Manual 77
PRE
L
IMINAR
Y
Removing the Air Filter 1. Open the screen.
2. Turn off the AC power switch and remove the power cord.
3. Lift the air filter up and toward you. Then, replace it with a new one (Runco part
number 379-0012-00).
6.4
Troubleshooting Tips
The CineWall provides several features for identifying and resolving product performance
issues. If the solutions suggested here fail to resolve your issue or if you encounter an
issue not described, please contact Runco Technical Support.
Status LEDs The LEDs on the electronics module can give
you more detailed information about the current
operational state of the CineWall. To see them,
open the screen.
Table 6-1 describes the CineWall LED status indications.
Table 6-1. CineWall Status LED Indications
LED Name
When the LED is...
Off Green Amber Red
Ready Lamp is on (or
no power)
Source Source absent Valid source
present
Source absent
or not valid
Lamp Lamp off Lamp on Lamp striking Lamp failed
Remote IR Not receiving IR
now
Receiving IR sig-
nal
Serial Data
No command
received
Received any
command
Serial Cmd Received com-
mand addressed
to “this” unit
Lamp Saver Lamp Saver not
active or lamp is
off
Lamp Saver
active
Source present
Lamp on
Active
Lamp is cooling
Source present
Lamp will come
on when cooled
Active
Source absent
Lamp off
Fan - System
Fan - DMD
Fan - Lamp
Ballast Status
Engine Status
Lamp Saver
Serial Cmd
Serial Data
Remote IR
Lamp
Source
Ready
DIGITAL DVI
DIGITAL HDMI
ANALOG
INPUT