Filter
Top Products
CineWall™ Installer/Integrator Manual 25
PRE
L
IMINAR
Y
4.1
Overview
Table 4-1 gives a quick overview of the CineWall installation process. The sections
following this one provide detailed instructions.
4. Installation
Table 4-1. Installation Overview
Step Procedure
For Details,
Refer to page...
1 Install Top Flange and Bottom Brackets on Chassis Assembly 26
2 Place Chassis Assembly with brackets installed into opening in
dedicated wall
27
3 Secure Chassis Assembly to wall 27
4 Install Screen Assembly:
• Fix screen in open position using fold-out strut
• Secure top of screen frame to hinge with safety catches
30
5 Power up the CineWall:
• Connect AC power to the CineWall
• Set main power switch on CineWall to ON
• Close screen
•Press ON on CineWall Setup remote control to turn on display
33
6 Align image corners with screen corners 34
7 Power down the CineWall:
•Press OFF on CineWall Setup remote control to turn off display
•Open screen
34
8 Connect the DHD Controller to the CineWall 36
9 Connect signal sources to the DHD Controller 38
10 Connect PC or control system to DHD Controller via RS-232 43
11 Power up the CineWall and DHD Controller:
• Connect AC power to the DHD Controller
• Turn on source components
• Close screen
• Set DHD Controller main power switch to ON
• Use remote control or ON/STANDBY ( ) button on DHD
Controller front panel to turn on system
47
12 Display calibration: adjust the following for each input and display
mode (resolution and frame rate); save settings when finished:
• Aspect ratio
• Brightness
• Contrast
• Color level
• Tint
• Sharpness
• White Balance
51