Filter
Top Products
Installation
26 CineWall™ Installer/Integrator Manual
PRE
L
IMINAR
Y
4.2
Mounting the CineWall
Chassis
This section provides detailed instructions for installing the CineWall chassis.
Install Top Flange and
Bottom Brackets on
Chassis Assembly
Install the Top Flange as shown in Figure 4-1. Then, install the Left and Right Bottom
Brackets (the ones with the latches on them) at the bottom corners of the chassis, and
install the Left Center and Right Center Bottom Brackets in the two intermediate locations.
Figure 4-1. Installing the Top Flange and Bottom Brackets
➤
Screw, Phillips Pan-Head,
0.164-32 x 0.25 x 0.25 (5x)
Top
Flange
Self-cliching
Nut (5x)
Screw, Phillips
Pan-Head,
1/4-20 x 0.5 x 0.5
(2 per bracket)
Bottom
Bracket,
Left
Bottom Brackets,
Left Center/
Right Center
Bottom
Bracket, Right