Filter
Top Products
Installation
CineWall™ Installer/Integrator Manual 35
PRE
L
IMINAR
Y
4.6
Connections to the
CineWall
Proceed as follows to connect the CineWall to your video sources, external controller(s) –
if present – and AC power.
When connecting your equipment:
• Turn off all equipment before making any connections.
• Use the correct signal cables for each source.
• Ensure that the cables are securely connected. Tighten the thumbscrews on
connectors that have them.
Route all cables through the cable
openings on the right side of the
CineWall chassis.
ROUTE CABLES
THROUGH THESE
OPENINGS