Filter
Top Products
Installation Preparation
CineWall™ Installer/Integrator Manual 19
PRE
L
IMINAR
Y
3.2
Unpacking and
Inspecting
When you receive your CineWall shipment, check the shipping containers for damage. If
there are signs of damage or rough handling, it is recommended that you have an agent of
the carrier present when the equipment is unpacked. If the shipping containers do not
appear to be damaged, move them to the installation site before opening them.
As you unpack each container, check all parts against the shipping documents. The
CineWall is protected in the shipping containers. Unpack them carefully, inspecting the
chassis and screen for scratches, dents or other signs of damage. If the equipment is
damaged, save all packing materials and notify both Runco and the carrier immediately.
Proceed as follows to unpack your CineWall:
1. Remove the top of the shipping container for
the chassis and associated hardware.
2. Lift the box containing the hardware up off of
the foam inserts and set it aside.
3. Remove the foam inserts on
the top corners of the chassis
and set them aside.
Hardware Box
Foam Inserts