Filter
Top Products
System Description
10 CineWall™ Installer/Integrator Manual
PRE
L
IMINAR
Y
2.6
DHD Controller Rear
Panel
Figure 2-3 shows the rear connector panel on the DHD Controller.
Figure 2-3. DHD Controller Rear Panel
Outputs 1. HDMI Out
Connect this to the HDMI connector on the CineWall (see Input Connectors and
LEDs on page 6).
2. Display Control
Connect this to the RS-232 input on the CineWall, using the provided communication
cable.
3. TRIGGERS
Connection for up to three (3), 12-volt trigger-controlled devices. Output current is
limited to 250 milliamperes (mA).
Inputs 4. USB
A standard, USB Series “B” connection to a personal computer. (For future use.)
5. HDMI 1 / HDMI 2 (Digital)
HDCP-compliant digital video inputs for connecting an HDMI or DVI source.
6. HD1 / HD2 (5 x Analog BNCs)
Two inputs (five BNCs per input) for connecting standard-definition (SD = 480i/576i),
enhanced-definition (ED = 480p/576p) or high-definition (HD = 720p/1080i/1080p)
component video sources, or RGBHV sources such as personal computers.
7. Component / SCART (5 x RCA connectors)
SD/HD input for connecting SDTV, EDTV or HDTV component video sources, or
RGBHV sources. Also provides RGB input for SCART RGBS sources.
8. Video
Standard, composite video input for connecting a VCR, camcorder or other
composite video source. Also provides composite sync input for SCART RGBS
sources.
1
5 6
414
2
3
1011
789
1213
➤
➤