Filter
Top Products
Maintenance and Troubleshooting
CineWall™ Installer/Integrator Manual 75
PRE
L
IMINAR
Y
6.2
Lamp Replacement
Change the lamp after 6,000 hours of use, or sooner if you notice a significant
decrease in brightness.
Removing the Old Lamp 1. Open the screen.
2. Turn off the AC power switch and remove the power cord.
3. Loosen the six screws holding
the display engine
compartment cover in place.
Then, remove the cover.
4. Loosen the lamp screw to the
right rear of the lamp.
5. Disconnect the lamp cable.
6. Pull the lamp away from you,
then straight up.