Filter
Top Products
Installation Preparation
22 CineWall™ Installer/Integrator Manual
PRE
L
IMINAR
Y
Create wall opening:
1. Locate the screen center based on the desired screen height.
2. From this point, measure/mark 44.375 inches to the left and to the right and 19.25
inches above and below.
3. Using a laser level, determine and mark the locations of the opening corners.
4. Double-check your measurements. “Measure twice, cut once” is always a great
rule of thumb to follow.
5. Using the marks as a guide, cut a rectangular opening 88.75 inches wide and 38.5
inches tall.
38.500"
(977.9 mm)
88.750" (2254.3 mm)