Polycom C12 Speaker System User Manual


 
Command Protocol Reference Guide
A - 77
Description
This parameter sets the ratio of the target gain applied by the expander versus
the difference between the input signal level and the expander threshold. For
example, if the expander ratio is 2 (i.e., 2:1) and the input signal level is 3 dB
below the expander threshold, the expander applies -6 dB of gain.
dp_exp_thresh Expander Threshold
Description
This parameter sets the RMS level (in dBFS) of the input signal below which
the expander engages.
Phys Chans Conferencing Mic/Line Input, Conferencing Line Output,
Sound Reinforcement Mic/Line Input, Sound Reinforcement
Line Output, Analog Telephony Input, Analog Telephony
Output, Submix, ConferenceLink Aux Input, ConferenceLink
Aux Output
Virt Chans Mono, Stereo
System Limits Minimum: 1.0, Maximum: 100.0, Resolution: 0.1
Default 2.0
User Limits
Supported
No
Argument Argument value
Argument Argument value
Channel Type Virtual Channel
Value Type Floating-Point
Read/Write Mode Read/Write
Phys Chans Conferencing Mic/Line Input, Conferencing Line Output,
Sound Reinforcement Mic/Line Input, Sound Reinforcement
Line Output, Analog Telephony Input, Analog Telephony
Output, Submix, ConferenceLink Aux Input, ConferenceLink
Aux Output
Virt Chans Mono, Stereo
System Limits Minimum: -100.0, Maximum: 0.0, Resolution: 0.1
Default -100
User Limits
Supported
No