Polycom C12 Speaker System User Manual


 
Command Protocol Reference Guide
A - 75
Description
This parameter sets the RMS level (in dBFS) of the input signal below which
the gate engages. The level must be below this threshold longer than the gate
hold time (set by dp_gate_hold) before the gate begins to apply a gain change.
dp_exp_attack Expander Attack Time
Description
This parameter sets the amount of time (in milliseconds) it takes the expander
to ramp the gain up to the target gain once the input signal level surpasses the
expander threshold.
dp_exp_decay Expander Decay Time
Argument Argument value
Channel Type Virtual Channel
Value Type Integer
Read/Write Mode Read/Write
Phys Chans Conferencing Mic/Line Input, Conferencing Line Output,
Sound Reinforcement Mic/Line Input, Sound Reinforcement
Line Output, Analog Telephony Input, Analog Telephony
Output, Submix, ConferenceLink Aux Input, ConferenceLink
Aux Output
Virt Chans Mono, Stereo
System Limits Minimum: 1, Maximum: 200
Default 10
User Limits
Supported
No
Argument Argument value
Channel Type Virtual Channel
Value Type Integer
Read/Write Mode Read/Write
Phys Chans Conferencing Mic/Line Input, Conferencing Line Output,
Sound Reinforcement Mic/Line Input, Sound Reinforcement
Line Output, Analog Telephony Input, Analog Telephony
Output, Submix, ConferenceLink Aux Input, ConferenceLink
Aux Output
Virt Chans Mono, Stereo