Filter
Top Products
Before you start
01
11
En
Setting the button alert volume
You can set the volume of the ‘beep’ you hear when you
press a button on the remote.
• Press BEEP to select a setting.
Each press selects between quiet, loud or off. The current
setting is shown on the touch screen.
Setting the time-out setting
• Default setting: 60sec
To save battery life, a timer automatically switches off the
remote control off after a set amount of time if no
commands are entered. You can adjust separate time-
out settings for the LCD, and the remote backlight.
1 Press TIMEOUT.
2 Use the + and – buttons to set the LCD TIMEOUT
and BACKLIGHT TIMEOUT settings.
You can adjust these from 20–120 seconds.
• The backlight timeout can’t be longer than the LCD
timeout setting.
3 Press ENTER when you’re finished.
You’ll return to the remote setup menu.
Resetting the remote control
Use this feature to reset the remote control settings to
the factory defaults.
Important
• Doing this will erase any of your personalized
settings.
1 Press RESET TO DEFAULT.
2 Confirm by pressing YES after reading each
screen.
After the screen goes blank, the Home menu appears
within a minute or so, and the remote control will be reset
to the default settings.
SETUP 2/3
CLOCK DISPLAY : AM/PM
CLOCK SETTING
BEEP :
TIMEOUT
KEY LABEL
SETUP 2/3
CLOCK DISPLAY : AM/PM
CLOCK SETTING
BEEP :
TIMEOUT
KEY LABEL
TIMEOUT
CANCELENTER
LCD TIME OUT
60 sec
60 sec
+
+
BACKLIGHT TIME OUT
-
-
SETUP 3/3
RESET TO DEFAULT
RESET
NO
YES
Do you want to reset
the REMOTE to the
DEFAULT settings ?
RESET
NO
YES
ALL settings you made
will be ERASED.
Is it all right?