Filter
Top Products
Operations Manual, HPA2, Compact Outdoor SSPA 205486 REV F 89
10.2.4 Data Tag
The data tag specifies the type of internal resource or information needed to be accessed on
the Compact Outdoor Amplifier. The data associated with certain tags is read only. Therefore
only the “Get” command byte would be associated with these data tags. The data tag byte
values are given in Table 10-2.
Tag Name
Byte
Value
Minimum valid
length of Data
Field
Description
System Tag
Settings
0 1 byte
This tag allows accessing various system set-
tings on remote unit. Host access status: Full
Read/Write access. Settings can be modified
at any time. Some settings may require hard-
ware reset of the remote SSPA unit.
System
Threshold Tag
1 2 bytes
This tag allows access to the critical unit
thresholds. Host access status: Full Read/
Write access. New thresholds are in effect im-
mediately after change.
System
Conditions Tag
3 1 byte
This tag allows access to the unit’s internal
conditions flags, such as fault status or current
system status. Host access status: Read only.
This type of data cannot be set or modified re-
motely.
ADC Channels
Access Tag
4 2 bytes
This tag allows access to the unit’s internal
Analog to Digital converter. Host access
status: Read only. This type of data cannot be
set or modified remotely.
Reserved 2 N/A
This tag is reserved and not used for SSPA
applications.
Table 10-2: Data Tag Byte Values