Filter
Top Products
Operations Manual, HPA2, Compact Outdoor SSPA 205486 REV F 33
3.9.1.5 RF Power Indicator
The RF Power indicator is the vertical meter in the central part of the Operation window. This
indicator reports the approximate output power of the amplifier. It uses the voltage from the
RF Power Detector to determine a corresponding power level in dBm. The accuracy of the
power indicator is ± 1 dB at the mid-point of the specified band, with a single CW or QPSK
carrier.
3.9.1.6 Carrier Enable
This button toggles between the “Enabled” and “Muted” conditions. This software mute
requires 70 msec maximum (30 msec typical) to take effect.
3.9.2 Settings Window
Figure 3-4 shows the ‘Settings’ window of the Paradise Datacom Universal Monitor & Control
Software. The ‘Settings’ window contains many of the global settings that are available in the
SSPA.
Figure 3-4: Universal M&C Settings Window