Operations Manual, HPA2, Compact Outdoor SSPA 205486 REV F 21
2.9 Compact Outdoor Mounting Kit Installation
These instructions outline how to install a single Paradise Datacom Compact Outdoor SSPA
unit onto an antenna boom using a Universal Compact Outdoor Mounting Kit. This kit allows
installation of the Compact Outdoor SSPA on antenna booms up to 10” thick.
2.9.1 Safety Considerations
These instructions are designed to be used by a single operator. As such, several safety is-
sues should be kept in mind during the installation.
1. The Paradise Datacom Compact Outdoor SSPA unit weighs approximately 36 lbs.,
and should be handled with care to avoid scratching the exterior coating and compro-
mising the unit’s corrosion resistance.
2. All bolts should be torqued down to within reasonable limits to avoid stripping the
threads.
3. The section of antenna boom the unit is to be mounted on should be straight, dry, and
free from corrosion or defects.
2.9.2 Inspection
On receiving the Universal Compact Outdoor Mounting Kit, inspect the contents to ensure all
parts are present. The kit should contain all items shown in Table 2-8.
Item # Qty Description Part No.
1 4 Bracket, Mounting L201394-1
2 4 Uni-Strut, 13.5” Lengths L201393-1
3* 4 1/2”-13 All Thread Stud, SS 188FTS 8-11 or -15
4 4 1/2” Lock Washer 50LW188
5 16 Nut, Hex, 1/2”-13 1/2-13 Nut
6 16 Washer, Flat, Std. 1/2” MS15795-819
7 4 Bolt, Hex, 1/2”-13 x 1.25, SS MS35307-411
* Kits are supplied with two different All Thread lengths (11.0” or 15.0”) depending on the
installation. The 11-inch All Thread (part no. 188FTS 8-11) allows mounting on booms up to
6” diameter. The 15-inch All Thread (part no. 188FTS 8-15) allows mounting on booms up to
10” diameter.
Table 2-8: Compact Outdoor SSPA Mounting Kit