Filter
Top Products
-3-
1. Operate indicator (OPERATE)
Is on (green) when the Disc Recorder’s power is
turned on.
2. Remote indicator (REMOTE)
Is on (orange) when the Disc Recorder is controlled
by an outboard device through the Serial Control
port (50).
3. Alarm Reset button (RESET)
Cancels an activated alarm and resets the system to
the condition prior to alarm activation.
4. Alarm indicator (ALARM)
Lights (red) for two seconds when an alarm is acti-
vated and then starts blinking.
Pressing the Alarm Reset button (3) will turn off the
indicator.
5. Alarm Recording indicator (ALARM REC)
Is on (green) when the Disc Recorder is in Alarm
Recording mode.
6. Recording indicator (REC)
Is on (red) when the Disc Recorder is recording,
and blinks when it is on standby for recording.
7. Disc indicator (DISC)
• Blinks/lights (red) when the recording capacity of
the DVD-RAM disc is running low.
(Blinks at 10% remaining space, blinks rapidly at
5%, and changes to steady light at 1%.)
• While overwriting in endless recording, continues to
turn on for two seconds and off for half a second.
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
R A M
PUSH OPEN PUSH OPEN
AV Disc Recorder WJ-DR
REMOTE
OPERATE
ALARM
RESET
REC
DISC
ALARM
REC
DISC CONTROL
■ Front View
REMOTE
OPERATE
ALARM
RESET
REC
DISC
ALARM
REC
AV Disc Recorder WJ-DR
PUSH OPEN
PLAY MODE
1↔ ALL
DISC
KEEP COVER CLOSED
TO PREVENT INSIDE FROM DUST
BUSY
ARARM REC
STANDBY
INDDEX
FIND
SET UP/ESC
SET
PAUSE REC
PLAY
T/L MODE
–
FORMAT
+
PLAY BACK
SELECT
LOCK
OFF ON
STOP
OPEN/
CLOSE
CONTROL
PLAY MODE
1↔ ALL
ALARM REC
STANDBY
INDDEX
FIND
SET UP/ESC
SET
PAUSE REC
PLAY
T/L MODE
–
FORMAT
+
PLAY BACK
SELECT
LOCK
OFF ON
STOP
OPEN/
CLOSE