Filter
Top Products
-28-
MAIN
SET UP ENABLE
SYSTEM *
REC MODE MODE1 *
MODE2 *
ALARM RECORD *
SEARCH/PLAY *
SYSTEM INFO *
Panasonic AV Disc Recorder V1.0R00
Move the cursor to SEARCH/PLAY in the MAIN menu by
pressing the or button, then press the SET but-
ton. The SEARCH/PLAY menu shown below appears on
the monitor screen.
SEARCH/PLAY
ON FIRST RECORD NEW
SKIP# RECORDS 40 RECORDS
SEARCH DATA RECORD TIME
THUMBNAIL 8
PLAY SINGLE RECORD
PLAY MODE LOOP
PLAY BACK RATE CAPTURE RATE
To selects parameter from the SEARCH/PLAY menu:
1. Move the cursor to the desired parameter by press-
ing the or button.
2. Select the mode by pressing the or button.
3. Press the SET UP/ESC button to return to the previ-
ous MAIN menu, if desired.
● Search Display Setup
This item lets you select the initial search window. You
can have record numbers displayed either in descend-
ing or ascending order.
1. Move the cursor to the ON FIRST RECORD parame-
ter in the SEARCH/PLAY menu by pressing the
or button.
2. Select either NEW or OLD by pressing the or
button.
NEW: Record numbers displayed in descending
order, starting with the newest one.
OLD: Record numbers displayed in ascending
order, starting with the oldest one.
The default setting is NEW.
● Skip Records Setup
This item lets you select the number of records skipped
each time the Advance Record ( ) or Reverse
Record ( ) button is pressed during playback.
1. Move the cursor to the SKIP # RECORDS parameter
in the SEARCH/PLAY menu by pressing the or
button.
2. Select the number of records quantity to be skipped
as shown below by pressing the or button.
40 → 80 → 120 → 160 → 200 RECORD
The default setting is 40 RECORDS.
● Search Data Setup
This item lets you select the data to be used in Direct
Search.
1. Move the cursor to the SEARCH DATA parameter in
the SEARCH/PLAY menu by pressing the or
button.
4. To edit the selected program, press the SET button
to move the cursor to the selected program editing
area.
5. Move the cursor to the position to be edited by
pressing the , , or button.
6. Select the desired time by pressing the (+) or (–)
button.
7. To apply the programmed recording patterns, press
the SET UP/ESC button to move the cursor to the
day parameter.
8. Repeat procedure 3 to program other days of the
week.
9. To apply the programmed recording patterns, press
the SET UP/ESC button to return to the previous
ALARM RECORD menu.
■ SEARCH / PLAY Menu
This menu allows you to change the Search (Find) and
Playback settings.