Panasonic WJ-DR200 Stereo Receiver User Manual


 
-14-
SETUP PROCEDURES
The Setup Menu provides a way for controlling functions
not available through direct input.
Displaying the SETUP MENU
1. Confirm that the camera and peripherals are con-
nected correctly and securely.
2. Turn on the power switches of all system compo-
nents.
3. Press the SET UP/ESC button of the Disc Recorder
for about 2 seconds or more.
The MAIN menu appears on the monitor screen as
shown below.
MAIN
SET UP DISABLE
SYSTEM *
REC MODE MODE1 *
MODE2 *
ALARM RECORD *
SEARCH/PLAY *
SYSTEM INFO *
Panasonic AV Disc Recorder V1.0R00
PLAY MODE
1ALL
SET UP/ESC
SET
FORMAT
+
PLAY BACK
SELECT
T/L MODE
• In the MAIN menu, press the SET UP/ESC button
for about 2 seconds to apply the setting and exit the
setup mode.
Note: If alarm is activated during the setup opera-
tion, the setup menu disappears and the display
returns to the normal picture. Any settings previ-
ously made take effect, even if the SET UP/ESC
button was not pressed.
The following buttons are valid in the setup menu:
UP : Moves the cursor upward.
DOWN : Moves the cursor downward.
LEFT : Moves the cursor to the left, or
selects the mode or parameter.
RIGHT : Moves the cursor to the right, or
selects the mode or parameter.
SET: Executes the selections and dis-
plays a submenu for an item with the
(
*
) mark.
SET UP/ESC: Executes the currently selected set-
ting and returns to the previous
setup menu.
(): Selects the next mode or parameter.
(+): Selects the previous mode or para-
meter.