Panasonic WJ-DR200 Stereo Receiver User Manual


 
-29-
LOOP: Repeats playing back the selected number
of playback records.
SINGLE CYCLE: Goes on standby after playing
back the selected number of records.
The default setting is LOOP.
Playback Rate Setup
This item lets you select the playback rate in seconds.
1. Move the cursor to the PLAY BACK RATE parame-
ter in the SEARCH/PLAY menu by pressing the
or button.
2. Select the desired rate shown below by pressing the
or button.
0.03, 0.07, 0.10, 0.17, 0.20, 0.33, 0.50, 1.0, 2.0,
3.0 ····· 10.0 sec, CAPTURE RATE
The default setting is CAPTURE RATE.
2. Select either RECORD TIME or RECORD NUMBER
by pressing the or button.
RECORD TIME: Searches the disc by recording
time.
RECORD NUMBER: Searches the disc by record
number.
The default setting is RECORD TIME.
Thumbnail Display Setup
This item lets you select the maximum number of
thumbnail pictures displayed in the search window.
1. Move the cursor to the THUMBNAIL parameter in
the SEARCH/PLAY menu by pressing the or
button.
2. Select either 8 or 16 by pressing the or but-
ton.
8: Displays a maximum of 8 thumbnail pictures.
16: Displays a maximum of 16 thumbnail pictures.
The default setting is 8.
PLAY Button Setup
This item lets you select the number of records played
back when the PLAY button is pressed.
1. Move the cursor to the PLAY parameter in the
SEARCH/PLAY menu by pressing the or
button.
2. Select the desired mode by pressing the or
button.
SINGLE RECORD: Plays back a single record.
ALL RECORDS: Plays back all records on the
disc.
The default setting is SINGLE RECORD.
Playback Mode Setup
This item lets you select the playback mode for the
selected PLAY button setup.
1. Move the cursor to the PLAY MODE parameter in
the SEARCH/PLAY menu by pressing the or
button.
2. Select either LOOP or SINGLE CYCLE by pressing
the or button.