-41-
Note: Pressing the (or ) button for about 2
seconds in step 2 will skip forward (or back-
ward) by the number of records specified for the
SKIP#RECORD parameter in the SEARCH/PLAY
menu.
4. Move the cursor to the thumbnail to be displayed by
pressing the , , or button.
5. Press the PLAY (or ) button to play
back the selected record forward (or backward).
6. To display the thumbnail display again, press the
INDEX button again.
7. To stop playback or release the search function,
press the STOP button.
● Direct Search
This function lets you search records directly by speci-
fying the record number or recording date.
Note: Confirm that the ALARM REC indicator is not lit.
If the indicator is lit, press the ALARM REC STAND-
BY button to release the alarm record mode.
1. Press the FIND button to display the record list with
the search editing area at the bottom as shown
below.
FIND
NO RECORD TIME
012348aMS AUG 1.98 14:59:55
012347 MA AUG 1.98 14:58:25
012346 M AUG 1.98 14:54:15
012345 SS AUG 1.98 13:10:10
012344aSA AUG 1.98 12:55:30
012343aSA AUG 1.98 12:55:00
012342 SS AUG 1.98 12:35:30
012341 S AUG 1.98 12:25:30
( 012348 RECORDS EXIST )
SEARCH TIME AUG 1.98 14:59:55 (
☞
SET)
2. Press the (or ) button to move the cursor to
the position to be edited in the search editing area.
3. Select the desired digit or month by pressing the (+)
or (–) button.
4. Repeat procedures 2 and 3 to edit the other posi-
tions.
5. Press the SET button.
If a record number or date matching the search is
found, playback starts immediately. If a matching
record is not found, a list of records including the
record with the closest matching number or date is
displayed. The closest match is blinking.
6. Press the SET button to play back the blinking
record.
7. To stop playback or release the find function, press
the STOP button.
Notes:
• Pressing the FIND button in the Thumbnail window
will display the thumbnail pictures, each with a
search editing area at the bottom.
• The content of the search editing area varies
depending on the mode set for the SEARCH DATA
parameter in the SEARCH/PLAY menu.
In the above step 2, however, you can press the
FIND button to toggle the content of the search edit-
ing area between record number and recording
date.
■ Deny Access Function
This function lets you deny access to specific records.
To use this function, you must set and verify a password
in the LOGICAL FORMAT menu.
Refer to Disc Password on page 31 for the necessary
settings.
1. Press the INDEX button to display the record list on
the monitor screen as shown below.
INDEX
NO RECORD TIME
012348aMS AUG 1.98 14:59:55
012347 MA AUG 1.98 14:58:25
012346 M AUG 1.98 14:54:15
012345 SS AUG 1.98 13:10:10
012344aSA AUG 1.98 12:55:30
012343aSA AUG 1.98 12:55:00
012342 SS AUG 1.98 12:35:30
012341 S AUG 1.98 12:25:30
( 012348 RECORDS EXIST )
1.a=Audio
2.S=SINGLE-SHOT M=MULTI-SHOT
T=TIMELAPSE
3.A=ALARM S=SENSOR T=THERMAL
ALARM REC
STANDBY
DISC PASSWORD
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
1 2 3 4 5 6 7 8 9 0
CLEAR
ENTER
(
☞
SET)
2. While the list is displayed on the monitor screen,
press the ALARM REC STANDBY button.
The DISC PASSWORD menu shown below appears.