Panasonic WJ-DR200 Stereo Receiver User Manual


 
-45-
Checking Your Password
If you have forgotten your password, you can look it up
as follows.
MAIN
SET UP DISABLE
SYSTEM *
REC MODE MODE1 *
MODE2 *
ALARM RECORD *
SEARCH/PLAY *
SYSTEM INFO *
Panasonic AV Disc Recorder V1.0R00
1. Press the SET UP/ESC button for about 2 seconds.
The MAIN menu appears on the monitor screen.
2. Move the cursor to SYSTEM INFO by pressing the
or button.
MAIN
SET UP ENABLE
SYSTEM *
REC MODE MODE1 *
MODE2 *
ALARM RECORD *
SEARCH/PLAY *
SYSTEM INFO *
Panasonic AV Disc Recorder V1.0R00
3. Press the SET button.
The SYSTEM INFO menu appears on the monitor
screen.
SYSTEM INFO
DRIVE SLEEP ON
MEDIUM INFO NO DISC
VOLUME LABEL - -
SET_UP PASSWORD - -
FACTORY USE
DIAG INFO (00- 0- 0 0:00)
FM CON -- JPEG --
SCSI CON -- AUDIO --
VIDEO DEC -- SERIAL I/O --
DRAM -- DVD DRIVE --
SRAM -- PD-2 LD-D100 M
STRM CON --
4. Pressing the following buttons will display your
password within brackets for a short period of 5
seconds.
To check your SETUP Password: Press the
and STOP buttons simultaneously with the
LOCK switch in ON position.
To check your FORMAT Password: Press the
FORMAT buttons (+ and –) simultaneously with
the LOCK switch in ON position.
To check your DISC Password: Press the ALARM
REC STANDBY and REC buttons simultaneous-
ly.
System Reset Operation
This operation lets you reset the system to the default
settings.
1. Confirm that the POWER switch is OFF.
2. Set the POWER switch to ON while pressing the
and buttons simultaneously.
Note: Do not release the and buttons until
“AUG 1.98 00:00:00” appears on the bottom left
of the monitor screen.
AUG 1.98 00:00:00
100%