Filter
Top Products
55
CASE4: If only the DVD player is equipped with the S-video
terminal
CASE2: If the components are not equipped with the S-
video terminals
CONNECTIONS 3:
VIDEO
VIDEO S-VIDEO
MONITOR
OUT
VCR 1
IN
(PLAY)
OUT
(REC)
DVD
DVD
S-VHS
VCR
To Video input 1
DVD player
DO NOT use these video terminals.
VIDEO
VIDEO S-VIDEO
MONITOR
OUT
VCR 1
IN
(PLAY)
OUT
(REC)
DVD
DVD
VHS
VCR
TV
To Video input 2
DVD player
DO NOT use these video terminals.
VIDEO
VIDEO S-VIDEO
MONITOR
OUT
VCR 1
IN
(PLAY)
OUT
(REC)
DVD
DVD
VHS
VCR
TV
To Video input 2
DVD player
DO NOT use these video terminals.
To Video input 1
VIDEO
VIDEO S-VIDEO
MONITOR
OUT
VCR 1
IN
(PLAY)
OUT
(REC)
DVD
DVD
S-VHS
VCR
TV
To Video input 1
DVD player
DO NOT use these video terminals.
To Video input 2
CASE1: If the components are equipped with the S-video
terminals
CASE3: If only the VCR is equipped with the S-video
terminal
One-Touch Video Play
• Simply by inserting a video cassette without its safety tab into the
VCR 1 (the VCR connected to the VCR 1 jacks), you can enjoy
the video playback without setting other switches manually. The
receiver automatically turns on and changes the
main room
source to “VCR 1.”
The TV automatically turns on and changes the input mode to the
position so that you can view the playback picture.
When you insert a video cassette with its safety tab, press the play
(
33
33
3) button on the VCR 1 or on its remote control. So, you can get
the same result.
– If the receiver is already turned on and the SUB ROOM
CONTROL lamp on the front panel is lit green, the receiver
changes the
sub-room source to “VCR 1.” (In this case, the TV
will not turn on automatically.)
• When you press PLAY on the remote control supplied with this
receiver for operating the VCR 1, the receiver automatically turns
on and changes the
main room source or sub-room source
(depending on the multi-room operation selector setting on the
remote control) to “VCR 1.”
– For main room operations only: The TV automatically turns on
and changes the input mode to the position so that you can view
the playback picture.
The AV COMPU LINK remote control system allows you to use the
five basic functions listed below.
Remote Control of the TV, DVD player, and VCR
Using This Remote Control
You can control the connected video components using this remote
control, aim the remote control at the remote sensors on the target
video component(s) directly.
For details, see page 59.
• For the TV having AV COMPU LINK terminal “RECEIVER/
AMP,” aim the remote control directly at the remote sensor on
the receiver.)
IMPORTANT:
To operate the video components using the IR signal transmitter
(supplied), place it so that it is aimed at the remote sensor on the
target video component(s).
• The IR signal transmitter can send signals at a distance of 10 feet (3
m).
DVD
TV
DVD player
VCR
IR signal transmitter
RX-9000VBK
EN54_65.RX-9000V[J]/f 00.2.15, 3:51 PM55