Filter
Top Products
14
Basic Operating Procedure for Sub-Room
On the front panel:
1. Press POWER.
The STANDBY lamp on the front panel goes off, and the MAIN
ROOM ON/OFF lamp on the front panel lights red.
• For more details, “Turning the Power On and Off (Standby)
and Selecting the Sub-room Operations” on page 20.
The sound comes out of the speakers in the main room, and the
buttons and controls on the front panel work for the main room
operations.
2. Press SUB ROOM ON/OFF so that the SUB
ROOM ON/OFF lamp on the button lights green.
The sound comes out of the front speakers in the sub-room.
If no sounds come out of the front speakers, press SUB ROOM
(SPEAKERS 2) so that the SUB ROOM speaker (SPEAKERS
2) lamp on the front panel lights green.
• See also “Setting the Front Speakers Either for the Main
Room or Sub-room” on page 23, and “Activating the Sub-
room Front Speakers” on page 22.
Note:
If the center speaker or rear speakers are used for the DSP mode
(see page 32) for the main room operations, the SUB ROOM
(SPEAKERS 2) button does not work.
3. Press SUB ROOM CONTROL so that the SUB
ROOM CONTROL lamp on the button lights
green.
Now the buttons and controls on the front panel work for the
sub-room operations.
4. Select and play a source.
5. Turn MASTER VOLUME to adjust the volume
level of the sound from the front speakers in the
sub-room.
From the remote control:
1. Set the multi-room operation selector to “SUB
ROOM.”
Now the buttons and controls on the remote control work for the
sub-room operations.
2. Press AUDIO POWER ON.
The STANDBY lamp on the front panel goes off, and the SUB
ROOM ON/OFF lamp on the front panel lights green.
• See also “Turning the Power On and Off (Standby) and
Selecting the Sub-room Operations” on page 20.
The sound comes out of the front speakers in the sub-room.
If no sounds come out of the front speakers, press SUB ROOM
(SPEAKERS 2) on the front panel so that the SUB ROOM
speaker (SPEAKERS 2) lamp on the front panel lights green.
• See also “Activating the Sub-room Front Speakers” on page
22.
Note:
If the center speaker or rear speakers are used for the DSP mode
(see page 32) for the main room operations, the SUB ROOM
(SPEAKERS 2) button does not work.
3. Select and play a source.
• See also “Operating the Playback Source for the Sub-room”
on page 22.
4. Press VOLUME + / – to adjust the volume level of
the sound from the front speakers in the sub-
room.
STANDBY ON
VOLUME
The sources and functions available for the sub-room
operations are limited.
For more details on the sub-room operations, see “Sub-room
Operations” on pages 20 to 22.
–
+
MASTER VOLUME
POWER
STANDBY
SUB ROOM
ON/OFF
SUB ROOM
CONTROL
SOURCE SELECTOR
SUB
ROOM
MAIN
ROOM
DVD DVD MUILTI CD TAPE/MD
TV/DBS VIDEO PHONO FM/AM
VCR 1 CDR/VCR 2
EN12_22.RX-9000V[J]/f 00.2.15, 2:53 PM14