Filter
Top Products
43
Adjusting the Front Speaker Output Balance
(Also see page 19)
1. Press MENU.
The MAIN MENU appears on the TV.
• Pressing one of the % / fi / @ / # buttons also displays the
MAIN MENU.
2. Press % / fi to move to “SOUND
CONTROL,” then press @ / #.
The SOUND CONTROL menu appears.
• “SURROUND LEVEL” and “SURROUND EFFECT” appear
on the display only when one of the DAP and Surround modes
is selected.
3. Press % / fi to move
to “BAL.” (Balance).
4. Press @ / # to adjust
the balance.
5. When you finish, press EXIT repeatedly until the
menu disappears from the TV.
Reinforcing the Bass
(Also see page 18)
1. Press MENU.
The MAIN MENU appears on the TV.
• Pressing one of the % / fi / @ / # buttons also displays the
MAIN MENU.
2. Press % / fi to move to “SOUND
CONTROL,” then press @ / #.
The SOUND CONTROL menu appears.
• “SURROUND LEVEL” and “SURROUND EFFECT” appear
on the display only when one of the DAP and Surround modes
is selected.
3. Press % / fi to move
to “BASS BOOST.”
4. Press @ / # to turn the
bass boost function
“ON” or “OFF.”
5. When you finish, press EXIT repeatedly until the
menu disappears from the TV.
Attenuating the Input Signal
(Also see page 18)
1. Press MENU.
The MAIN MENU appears on the TV.
• Pressing one of the % / fi / @ / # buttons also displays the
MAIN MENU.
2. Press % / fi to move to “SOUND
CONTROL,” then press @ / #.
The SOUND CONTROL menu appears.
• “SURROUND LEVEL” and “SURROUND EFFECT” appear
on the display only when one of the DAP and Surround modes
is selected.
3. Press % / fi to move
to “INPUT ATT.”
4. Press @ / # to turn the
Input Attenuator mode
“ATT ON” or
“NORMAL.”
5. When you finish, press EXIT repeatedly until the
menu disappears from the TV.
Adjusting the Subwoofer Output Level
(Also see page 18)
1. Press MENU.
The MAIN MENU appears on the TV.
• Pressing one of the % / fi / @ / # buttons also displays the
MAIN MENU.
2. Press % / fi to move to “SOUND
CONTROL,” then press @ / #.
The SOUND CONTROL menu appears.
• “SURROUND LEVEL” and “SURROUND EFFECT” appear
on the display only when one of the DAP and Surround modes
is selected.
3. Press % / fi to move
to “SUBWFR LEVEL.”
4. Press @ / # to adjust
the subwoofer output
level.
5. When you finish, press EXIT repeatedly until the
menu disappears from the TV.
Adjusting the DSP Modes
(Also see pages 35 – 39)
1. Press MENU.
The MAIN MENU appears on the TV.
• Pressing one of the % / fi / @ / # buttons also displays the
MAIN MENU.
2. Press % / fi to move to “MODE.”
3. Press @ / # to select the
DSP mode you want to
adjust.
• In this example, “LARGE
THEATER” is selected.
4. Press % / fi to move
to “SOUND
CONTROL,” then
press @ / #.
The SOUND CONTROL
menu appears.
Continued to the next page.
EN42_53.RX-9000V[J]/f 00.2.18, 2:28 PM43