JVC RX-9000VBK Stereo System User Manual


 
2
Introduction
We would like to thank you for purchasing one of our JVC products.
Before operating this unit, read this manual carefully and thoroughly to obtain the best possible performance
from your unit, and retain this manual for future reference.
Features
Main Functions
Dolby Digital Decoder Incorporated
You can enjoy Dolby Digital, one of the most advanced home
theater sound systems available. Dolby Digital, with five full-
range channels and a subwoofer channel, lets you enjoy the most
spectacular theater sound at home when you view movies on
DVD.
Compatible with DTS Digital Surround
The RX-9000VBK is compatible with DTS Digital Surround as
well. DTS Digital Surround is the latest digital movie soundtrack
format that delivers 5.1-channel audio like Dolby Digital. Using a
low audio-data compression rate, it features natural, solid and
clear sound.
Multi Room Operations
You can connect two pairs of the front speakers to the RX-
9000VBK, and use them to listen to different sources in the
different rooms (Main room and Sub-room) at the same time.
RF/IR Multi-brand Remote Control
The remote control sends out not only IR (infrared) signals but
also RF (radio frequency) signals as coded commands to control
the receiver. The RF rod antenna can receive the RF (Radio
Frequency) signals sent from the remote control to operate the
receiver. In addition, the supplied RF signal transmitter can
transmit IR signals which could control other video components.
The remote control provided with this receiver can transmit
control signals for many manufacturers’ video components.
COMPU LINK Remote Control System
The COMPU LINK remote control system allows you to operate
other JVC audio components from this receiver.
TEXT COMPU LINK Remote Control System
The TEXT COMPU LINK remote control system has been
developed to deal with the disc information recorded in the CD
Text and MDs. Using these information in the discs, you can
operate the CD player or MD recorder through the receiver.
AV COMPU LINK Remote Control System
The AV COMPU LINK remote control system allows you to
operate other JVC video components from this receiver.
Main Technologies
K2 Interface
K2 Interface eliminates jitter and ripples, achieving a drastic
reduction in digital distortion. You can obtain a natural sound field
from stereo and 5.1 channel sources.
Dynamic Super-A
Dynamic Super-A is JVC’s exclusive technology which combines
the silky, distortion-free sound of a class-A amplifier and the
robust efficiency of a class-B amplifier.
Precautions
Power sources
When unplugging the receiver from the wall outlet, always pull
the plug, not the AC power cord.
Do not handle the AC power cord with wet hands.
If you are not going to operate the receiver for an extended period
of time, unplug the AC power cord from the wall outlet.
Multi-room operations
Do not use the remote control outdoors or install the speakers
outdoors.
When operating the receiver from the place where you cannot see
the receiver (for example, when controlling the receiver installed
in the living room, from the kitchen), pay attention to the
following not to surprise other people:
Be careful not to turn up the volume so high when controlling
the receiver without listening to the playback sound.
Be careful not to surprise other people at a sudden sound coming
out of the receiver when turning it on. (A sudden stop of the
sound may also surprise other people.)
If the receiver operates by itself or malfunctions, the following
causes will be considered.
Interference to RF communication between the receiver and the
remote control from outside.
The remote control is operated unintentionally. For example, a
book is placed on the remote control, possibly, depressing some
buttons on the remote control.
If your neighbour uses the same or similar RF remote control
system, the receiver may happen to receive the RF signals sent
from such an RF remote control system, which could cause your
receiver to be operated unintentionally. If this happen, stop using
the RF rod antenna and the remote control, and consult your JVC
dealer or the nearest JVC Service Center.
Others
Should any metallic object or liquid fall into the unit, unplug the
unit and consult your dealer before operating any further.
Do not disassemble the unit since there are no user serviceable
parts inside.
If anything goes wrong, unplug the AC power cord and consult your
JVC dealer.
EN01_11.RX-9000V[J]/f 00.2.15, 2:44 PM2